With over 40 years experience of designing and building high integrity test and calibration systems, Chell's team of mechanical, electronic and software engineers are ready to design and build solutions for your R&D and production test and calibration applications.
Chell provides customers with a comprehensive calibration service covering all measurement instruments supplied by the company.
Chell Instruments offer a wide range of high quality and reliable mass flow meters, controllers and systems suitable for use in a wide range of applications and industries.
With over 40 years of experience in flow measurement and control, we are extremely well placed to assist in specifying and supplying instumentation for your application, from single instruments to bespoke automated systems. Chell's impressive calibration and repair facilities also allow us to offer comprehensive after sales support.
Chell Instruments are the UK distributor for the 'SAES Pure Gas' range of gas purification equipment. These offer incredible purification performance over a huge range of gases and flow rates through the use of absorber, adsorber, catalyst, heated getter and palladium membrane purification technologies.
We also supply a range of gas handling solutions, from full, bespoke gas panels to high performance needle valves and regulators.
Chell offer a wide range of equipment for the measurement and control of gas pressure. This could be a very high-end primary pressure standard, benchtop calibrator, portable calibrator or simply a single transducer. We can also provide bespoke, automated pressure measurement systems tailored to your exact process requirements.
Chell's impressive calibration and repair facilities also allow us to offer comprehensive after sales support.
Chell supply a range of temperature scanners to complement the pressure scanners
Chell Instruments offer a wide range of high quality and reliable vacuum measurement instrumentation for use in a huge variety of applications and industries.
With over 30 years of experience in vacuum measurement and control, we are extremely well placed to assist in specifying and supplying instrumentation for your application, from single instruments to bespoke automated systems.
Chell's impressive calibration and repair facilities also allow us to offer comprehensive after sales support.
16 Intelligent pressure scanner module with engineering unit output.
Ultra-miniature design - smallest intelligent pressure scanner available.
Up to 0.04% FS accuracy output.
Thermally compensated from -40 to 90oC
Light Weight - 17g.
Full configuration and output over CAN.
Enhanced diagnostic information over CAN.
Rugged enclosure for on-vehicle applications. Sealed to IP67
Fully configurable over Ethernet with embedded web server (using optional daughter board).
The nanoDaq-LTC is a further development of the nanoDaq-LT series.
The LTC is designed for applications where small size and light weight are a priority. The LTC doesn’t sacrifice any of its features and retains its class leading performance.
The nanoDaq-LTC is primarily a CAN device and as such, it can be fully configured over CAN. It retains the ability to add Ethernet communications (via optional daughter board) and therefore access to the inbuilt web server. This functionality is required during the in-depth calibration processes that take place during manufacture.
The nanoDaq-LTC is a fully configurable smart pressure scanner that will output pressure data in engineering units over CAN.
The nanoDaq-LTC makes use of 16 absolute transducers which are thermally compensated and conditioned to provide 16 absolute or 15 differential measurements relative to one (selectable) reference port.
The nanoDaq-LTC features some advanced diagnostic information available over CAN. It will broadcast a status message every 500mS containing such information as firmware version, serial number, hardware version, detected CAN errors etc.
The nanoDaq-LTC is contained within a miniature package which is sealed to IP67 enabling it to be used in harsh environments. It is also available with alternative packaging to suit particular applications - please contact Chell for more details.
The nanoDaq-LTC is supplied with a flying lead containing two twisted pairs. We can terminate this in any suitable connector if required.
The transducers within the nanoDaq-LTS have a very high proof pressure (50psig, 64.5 psia) which reduces the chances of in-field transducer damage.