Systems

Bespoke Test and Calibration systems

With over 40 years experience of designing and building high integrity test and calibration systems, Chell's team of mechanical, electronic and software engineers are ready to design and build solutions for your R&D and production test and calibration applications.

Systems

UKAS Calibration Service

Chell provides customers with a comprehensive calibration service covering all measurement instruments supplied by the company.

Flow

Mass Flow Meters, Systems and Controllers

Chell Instruments offer a wide range of high quality and reliable mass flow meters, controllers and systems suitable for use in a wide range of applications and industries.

With over 40 years of experience in flow measurement and control, we are extremely well placed to assist in specifying and supplying instumentation for your application, from single instruments to bespoke automated systems. Chell's impressive calibration and repair facilities also allow us to offer comprehensive after sales support.

Gas Handling

Gas Handling, Gas Purification Equipment

Chell Instruments are the UK distributor for the 'SAES Pure Gas' range of gas purification equipment. These offer incredible purification performance over a huge range of gases and flow rates through the use of absorber, adsorber, catalyst, heated getter and palladium membrane purification technologies.

We also supply a range of gas handling solutions, from full, bespoke gas panels to high performance needle valves and regulators.

Pressure

Gas pressure measurement and control equipment

Chell offer a wide range of equipment for the measurement and control of gas pressure. This could be a very high-end primary pressure standard, benchtop calibrator, portable calibrator or simply a single transducer. We can also provide bespoke, automated pressure measurement systems tailored to your exact process requirements.

Chell's impressive calibration and repair facilities also allow us to offer comprehensive after sales support.

Temperature

Chell supply a range of temperature scanners to complement the pressure scanners

Vacuum

Vacuum Measurement and Control

Chell Instruments offer a wide range of high quality and reliable vacuum measurement instrumentation for use in a huge variety of applications and industries.

With over 30 years of experience in vacuum measurement and control, we are extremely well placed to assist in specifying and supplying instrumentation for your application, from single instruments to bespoke automated systems.

Chell's impressive calibration and repair facilities also allow us to offer comprehensive after sales support.

MicroDaq-Int

MicroDaq-IntMicroDaq-Int

The MicroDaq interface range are designed to make interfacing with the MicroDaq / MicroCAT/ nanoDaq range quick a straight forward.

The MicroDaq-Int is a single channel unit and the MicroDaq-Int-8 will connect to up to 8 units. The MicroDaq-Int-8 has an Ethernet connection per port which allows the user to connect each port to a suitable hub or switch.

All the interfaces use the MicroDaq-Cab cable to connect to the MicroDaq and they include DC power supplies suitable for the loads. The interfaces use standard connectors for the Ethernet, CAN and hardware trigger RJ45, ‘D’ type and BNC).

MicroDaq Interfaces Data Sheet.pdf

MicroDaq-INT-1 Interface 3D STEP file.zip

Related Products

MicroDaq 2 Smart Pressure Scanner

Read More

MicroCAT Pressure Scanner

Read More

nanoDaq-LT - Low Cost multi-point pressure measurement

Read More

CANdaq5 - Stand alone version of the MicroDaq2

Read More