Systems

Bespoke Test and Calibration systems

With over 40 years experience of designing and building high integrity test and calibration systems, Chell's team of mechanical, electronic and software engineers are ready to design and build solutions for your R&D and production test and calibration applications.

Systems

UKAS Calibration Service

Chell provides customers with a comprehensive calibration service covering all measurement instruments supplied by the company.

Flow

Mass Flow Meters, Systems and Controllers

Chell Instruments offer a wide range of high quality and reliable mass flow meters, controllers and systems suitable for use in a wide range of applications and industries.

With over 40 years of experience in flow measurement and control, we are extremely well placed to assist in specifying and supplying instumentation for your application, from single instruments to bespoke automated systems. Chell's impressive calibration and repair facilities also allow us to offer comprehensive after sales support.

Gas Handling

Gas Handling, Gas Purification Equipment

Chell Instruments are the UK distributor for the 'SAES Pure Gas' range of gas purification equipment. These offer incredible purification performance over a huge range of gases and flow rates through the use of absorber, adsorber, catalyst, heated getter and palladium membrane purification technologies.

We also supply a range of gas handling solutions, from full, bespoke gas panels to high performance needle valves and regulators.

Pressure

Gas pressure measurement and control equipment

Chell offer a wide range of equipment for the measurement and control of gas pressure. This could be a very high-end primary pressure standard, benchtop calibrator, portable calibrator or simply a single transducer. We can also provide bespoke, automated pressure measurement systems tailored to your exact process requirements.

Chell's impressive calibration and repair facilities also allow us to offer comprehensive after sales support.

Temperature

Chell supply a range of temperature scanners to complement the pressure scanners

Vacuum

Vacuum Measurement and Control

Chell Instruments offer a wide range of high quality and reliable vacuum measurement instrumentation for use in a huge variety of applications and industries.

With over 30 years of experience in vacuum measurement and control, we are extremely well placed to assist in specifying and supplying instrumentation for your application, from single instruments to bespoke automated systems.

Chell's impressive calibration and repair facilities also allow us to offer comprehensive after sales support.

Hastings HFM-200 / HFC-202 Low Capacity Flowmeters and Controllers

Hastings HFM-200 / HFC-202 Low Capacity Flowmeters and Controllers

• ±1% of Full-Scale Accuracy

• Proven Reliability

• Range — 10 to 25,000 sccm (N2 Equivalent)

The HFM/HFC Series of flow instruments is based on a modular design. At the heart of each instrument is an insulated thermal transfer sensor which provides enhanced zero stability. This sensor is designed to be removable/replaceable in the field to virtually eliminate long down time due to clogging. Additionally, the HFM/HFC design features an integral filter and an easily replaceable closed loop electronics card.* The HFC also features an externally adjustable valve with easily replaceable flow orifices.
All of these standard features, when coupled with the instrument’s inherent linear response to flow changes and THIs’ long-proven reputation for quality, result in the finest flowmeters and flow controllers available today.

HFM200-HFC202 Data Sheet

Mass Flow Product Guide

HFM200-HFC202 Manual

Related Products

Hastings HFM-201 / HFC-203 Medium Capacity Flowmeters and Controllers

Read More