Digital Vacuum Controller 760 Plus

home
news
search

applications
principals
products

calibration lab Service dept
Vacuum fabrications

Digital Vacuum Controller 760 Plus
PDF Data sheet download (77kB)

	Applications Processes Requiring Accurate Vacuum Measurement & Control: Glove Boxes Cryogenics Vacuum Furnaces Pharmaceutical Production Freeze Drying Agricultural Processes Air Conditioning Thermal Food Containers Plasma Coating Refrigeration (HVAC) Accelerators Appliance Manufacturing
Features Range 760 Plus: 0.1 to 999.9 Torr Two Control Points Fast Response and Linear Output Optional Instrument Configurations and Sensor Fittings Fail Safe: Loss of Power = Loss of Vacuum Complete Installation and Calibration Accessories

760 Plus ™ Vacuum Controller
The 760 Plus (Model HPM-760) Vacuum Controller is an exceptionally stable, accurate, repeatable absolute pressure gauge that provides excellent linearity and is unaffected by gas composition. A full 4-digit meter indicates in 0.1 Torr units from 0.1 to 999.9 Torr.

The heart of this vacuum controller is the HPM-760S module, a stainless steel measurement volume attached to a small and rugged piezo-resistive transducer on a silicon chip. The chip includes a sealed vacuum reference, a resistive bridge circuit, and a temperature compensation network which provides outstanding accuracy and stability.

When exposed to atmosphere, the instrument measures barometric pressure. Calibration is simple, no test equipment is necessary, only an accurate barometric reading is necessary to set the high end. The HPM-760 power supply includes an LED digital readout and two vacuum alarm relays. Set point pressure is displayed by pressing the up or down arrows. The display will default to measure pressure after approximately 15 seconds. The two SPST relays are rated for 230 VAC max. at 5 amps and can be set to activate on either increasing or decreasing pressure.

Installation Accessories
Hastings Instruments offers a complete line of system attachments allowing for easy maintenance and contamination resistance operations. Gauge tubes are offered with various system fittings to match almost any system attachment requirement. Additionally, Hastings’ complete line of quick disconnect attachments allows customers to install these special fittings once and then easily replace sensors without vacuum sealant or tape. For particularly dirty systems, Hastings offers a particle drop-out trap containing a series of nine separate baffles which prevent solid contaminants from having a direct path to the sensors thermopile.

Specifications (Typical)

760 Plus™ Range	0.1 to 999.9 Torr
Accuracy	± 0.1% Full Scale up to 760 Torr
Resolution	0.1 Torr
Output	0 to 5 VDC (5 VDC = 999.9 Torr Standard) 0 to 8 VDC (8 VDC = 800.0 Torr) optional 4 to 20 mA optional 2 to 10 mA optional
Relays	115 vac @ 5 amps SPST 230 vac @ 5 amps SPST
Power	115 vac @ .05 amps, 50/60 Hz 230 vac @ .03 amps, 50/60 Hz
Dimensions	3.78"(W) x 1.89"(H) x 4.80"(D) 96cm(W) x 48cm(H) x 125cm(D)
Weight	2 lbs (0.9 Kg)
Gauge Tube	Type HPM-760S
Leak Tested	10 -8 SCCS
Over Pressure	30 psig
Operation Temperature	0-50 °C.
Wetted Materials	316 Stainless Steel
Connection	1/8" NPT